Airxcel 48000 Series Especificaciones descargar pdf (Pagina 9)

TIE ALL WIRING TO INSURE NO CONTACT

WITH THE HEATER OR ANY SHARP EDGES.

KEEP IN MIND THAT HIGH VELOCITY AIR

WILL BE ENCOUNTERED IN THIS AREA.

FIGURE 4

FIGURE 3

FIGURE 5

INSTALL AIR GRILLE ASSEMBLY

1. Temporarily remove the air grille assembly filter

door. A quarter-turn of the fastener will disengage

the door. Attach the air grille frame to the mount

frame with 3 screws as shown in Figure 1 – use 3/4"

screws. Adjust as desired to insure that all foam parts

are within the grille perimeter, and secure the corners

of the grille to the ceiling. These 4 corner screws are

not provided. Check all fits to insure that a

reasonably air tight seal exists to separate unit supply

air from unit return air. Re-install the filter door.

2. Installation is now complete.

Drain Pan

Basepan

1 2 3 4 5 6 7 8 9 10

Sin comentarios

Airxcel 48000 Series Especificaciones Pagina 9